Knowledge Base:  

You are here: Knowledge Base
Page of 1
Do you buy/sell complete hovercraft?
Although we specialize in parts and supplies we do periodically buy and sell used machines and can connect buyers and sellers together. If you are interested in NEW hovercraft, check out the Hoverstre
Does HH-66 glue work on finger skirts?
It depends on the skirt. The HH-66 glue is only for the vinyl (PVC) coated nylon material typically used with bag skirts. Most finger skirts can not be glued. However, some of our fingers like Scat Su
How do I choose the proper Hascon fan for my application?
The short answer to this question is to simply call us! One of the benefits of ordering a fan through Slipstream is the unlimited tech support you'll get. No matter what kind of setup you have, chance
I have X model hovercraft and need finger skirts for it. Can you make them?
YES! We custom make finger skirts all the time for all kinds of different machines. We've even custom made skirts for large craft using 18oz nylon! Contact us and we can give you an estimate. customer
I want to buy a fan for X engine, but eventually will upgrade to Y engine. Can I reuse the same fan?
Most likely, yes, you can use the same fan. All Hascon fans we sell have a fully adjustable blade pitch system that can be easily changed by the customer. If you do plan to change engines, just contac
I'm confused and not sure what I need. I have questions. Lots of them. What do I do?
Just send us an email. We're happy to help and have plenty of experience make sure you get exactly what you need.
I'm in Indianapolis and want to pick up my order. Do you have a retail store?
No, we do not have a retail store. 95% of our sales are out of state, so it would just add unnecessary expenses. However, if you want to pick up an order in person that is no problem, we just ask that
My order didn't go through but my credit card was charged anyway!
Short answer: Your card was NOT charged. It was only authorized and it will disappear eventually. This all happens between the banks and we have no control over it at all. Also worth noting is tha
What is the proper jetting for my Rotax engine and Bing carb?
Look at this chart:
What skirts do I need for my Scat?
Choosing the proper skirts for you Scat is easy. There are only two options, a 9 foot long hull and a 12 foot long hull. The 12 foot long hulls are much less common and look enormous compared to the 9
What's better for steering, stainless cable and pulley or a push-pull cable?
The majority of the time, the push-pull cable makes the most sense.  Here are the factors to consider: Push-Pull Cable: 1.  Only one push-pull cable is required vs having a "pull" cable on e